Home Addition Cost Calculator
Pick your city, what you want to add and how big. You get a cost range based on local building costs, and the resale value the new space typically adds.
We could not load city data just now. Please refresh the page.
A bedroom is about 150 to 200 sq ft. A primary suite is 300 to 450. An in-law suite is 400 to 700.
Your addition
Pick a state and city to see your numbers.
Estimated cost to build
Free. We check your own lot against your city's rules.
Planning figures for comparing options. Not a construction quote, an appraisal or a promise of rent. A licensed builder's bid and your city's plan check set the real numbers.
How we calculate this
We start with the cost per square foot we have on file for your city: one figure for building out at ground level and one for building up. Those come from the same city dataset that powers our city pages, covering 617 cities in California, Texas, Florida, Arizona, Colorado, Washington and Oregon. If we have no figure for your city, we use your state's average and say so under the result.
Then we adjust for what you are building:
- Bedroom, office or living space: the base rate
- Primary suite with a bathroom: 15% above the base rate
- In-law suite with bath and kitchenette: 25% above the base rate
- Kitchen expansion: 30% above the base rate
- Mudroom, entry or small bump-out: 10% above the base rate
- Finish level: standard is 10% under the base rate, premium is 25% over
The result is shown as a range, from 10% under that figure to 15% over, because no two houses are the same. Value added uses the 50% to 75% of cost that a permitted addition typically brings back at resale.
What the range leaves out
Permit and plan check fees, design and engineering, upgrades to your electrical panel or sewer line, and anything unusual about your lot such as a slope or poor soil. Those are found by looking at your actual property, which is what the free property audit is for.
Thinking about a rental unit instead?
An addition adds living space. A backyard unit adds a second home that can earn rent. If that is closer to what you want, compare the numbers with the ADU cost calculator and the ADU rental income calculator.
Common questions
How much does a home addition cost per square foot?
In the 617 cities we track, building out at ground level runs from $150 to $400 per square foot and adding a second story runs from $200 to $600. Where you live moves the number more than anything else, which is why this calculator starts with your city.
Is it cheaper to build up or build out?
Building out is usually cheaper per square foot because it needs a new foundation and roof but leaves the existing house alone. Building up avoids using yard space, but the house below has to carry the new floor, so it often needs structural work, a stair and a temporary roof. Switch between the two above to see the gap in your city.
Why does a kitchen or bathroom addition cost more than a bedroom?
Plumbing, cabinets, counters, appliances and tile. A bedroom is framing, drywall, a window and a closet. A kitchen expansion packs the most expensive trades into the fewest square feet, so its cost per square foot is the highest of the room types here.
Does a home addition add value to my house?
A permitted addition adds square footage that appraisers count as living area. Well-planned additions typically bring back 50% to 75% of their cost at resale, and the calculator shows that range. The rest of the value is in living in the space.
Do I need a permit for a home addition?
Yes. Any addition that adds floor area needs a building permit, and the city will ask for drawings: a site plan, floor plans, elevations and structural details. Unpermitted additions cause problems at sale and with insurance.
How accurate is this estimate?
It is a planning range, good for deciding whether a project is worth pursuing and how big to make it. It does not know your soil, your roof, your electrical panel or your finishes. A licensed builder pricing a real set of drawings gives you the number to budget against.
More free tools
See all free toolsA calculator uses city averages. Your lot is not average.
The free property audit looks at your own address: your lot lines, your setbacks and what fits behind your house. We won't take any money unless your property qualifies.
Get my free property audit