Floor Plan Drafting · Florence, AZ
Professional Floor Plan Drafting
for Florence, AZ Homes
As-built drawings, permit-ready floor plans, and renovation layouts for Florence homeowners, investors, and contractors. Accurate CAD drawings in 10 business days, starting at $997.
14-day money-back guarantee · 10 business day turnaround
Common Uses in Florence
Local Intelligence
What Florence Homeowners Need to Know Before Submitting
Size & Zoning Rules
Accurate floor plans are the foundation of any ADU, garage conversion, or addition permit in Florence — Community Development Department will not accept a permit application without them. Florence's current ADU size cap is 1,000 sq ft — within the typical range for most floor plan configurations.
Florence does not impose an owner-occupancy requirement, so you can rent both the main home and any ADU or conversion as investment units.
Homeowners in Florence who document and legitimize their square footage correctly are positioning a home in a rental market where 1-bedroom units average approximately $961/month.
Permit Process & Fees
Community Development Department permit fees for this project type typically range from $8,923 to $12,461 depending on project valuation and scope. Plan check runs approximately 8 weeks — though each correction cycle adds 3–6 weeks, which is why code-compliant drawings matter so much.
Floor plans submitted to Community Development Department as part of a permit application must include a site plan, floor plans, all four elevations, an electrical plan, and energy compliance documentation — plus if structural changes are involved, a licensed engineer must stamp the structural drawings.
Visit Community Development Department ↗Construction Cost Context
Florence's adu / renovation construction costs run $200–$280 per square foot — a moderate range driven by labor markets, local code complexity, and finish level. Our drawings are priced at a fraction of what a full-service architect would charge to produce the same permit set.
⚠ Common Pitfall in Florence
Many Florence lots still run on private septic systems instead of municipal sewer, so the Community Development Department will require a Pinal County Environmental Health septic capacity review before they'll even accept your ADU application — and if your existing tank was sized only for the main house, you're looking at a full septic upgrade that can run $10,000+ and add several weeks to your timeline. Also, since Florence sits outside any coastal or major floodplain overlay, most delays actually come from irrigation easements tied to old agricultural parcels; the town often requires proof that your ADU footprint doesn't sit on a canal right-of-way tied to the San Carlos Irrigation District, which means pulling historical plat records that most homeowners don't know exist.
Expert Verdict — Marcus Reid, Licensed Designer
"In my experience with Florence's 96% HOA saturation, that 8-week timeline and $250/sqft figure are state-level estimates, not a reflection of what's happening on the ground here — I'd call the Community Development Department directly and get at least two local contractor quotes before penciling in a budget. What the data also doesn't show is the HOA architectural review layer, which routinely adds weeks on top of the municipal plan check clock, so don't assume those two processes run in parallel."
Market Context
Florence has a median home value of $270,000. Comparable renovation projects in this market typically add 21% to resale value.
Neighborhoods in Florence with the strongest renovation and resale value potential include Anthem at Merrill Ranch, Magma Ranch, Mesquite Trails, Florence Gardens, Quail Run. High-end master-planned community with larger lots and strong demand for multi-generational living space.
Permit Process
Permit applications are reviewed by the Community Development Department, with a plan check timeline of approximately 8 weeks. Permit fees in Florence range from $8,923 to $12,461 depending on project scope. Design review: Yes - in historic districts only.
Florence falls within Seismic Design Category B, which affects structural requirements for any new addition tying into the existing structure.
Local Financing Resources
Local Floor Plan Lenders in Florence
These lenders offer HELOC and renovation financing that often requires accurate as-built drawings in Pinal County. Compare terms before committing.
OneAZ advertises one-time-close construction loans up to $3,000,000 with 80% financing available.
Visit Lender ↗Local Pinal County credit union offering HELOCs with borrowing up to 90% CLTV and up to $200,000.
Visit Lender ↗Large Arizona credit union offering competitive HELOC rates suitable for home improvements and ADU funding.
Visit Lender ↗Offers custom home improvement and construction loans marketed for major renovations or building new homes.
Visit Lender ↗Specialty platform partnering with credit unions to offer ADU-specific financing programs and resources.
Visit Lender ↗Build With A Plan is not affiliated with these lenders. Always compare rates and consult a mortgage professional.
Local Build Partners
Vetted Local Contractors in Florence
Need a contractor once your drawings are ready? These are vetted local options. Independent — no referral fees paid or received.
Build With A Plan provides drawings only. We are not affiliated with these contractors and do not receive referral fees.
What We Deliver
What's Included in Your Florence Floor Plan Package
Transparent Pricing
Florence Floor Plan Packages
One-time fee. No retainer. No hourly billing.
- ✓As-built floor plans (all levels)
- ✓Verified square footage
- ✓Door & window schedule
- ✓Room labels and dimensions
- ✓PDF + DWG delivery
- ✓10 business day turnaround
- ✓Everything in Starter
- ✓Electrical layout documentation
- ✓Plumbing fixture locations
- ✓Site plan with setbacks
- ✓Code notations for permit submittal
- ✓1 round of revisions
- ✓Everything in Standard
- ✓Proposed renovation overlay
- ✓3D massing model
- ✓HOA submission package
- ✓Title 24 energy compliance
- ✓2 rounds of revisions
- ✓Priority 5-day turnaround
How It Works
Your Floor Plans in 3 Steps
Share Your Home Details
Provide your property address, room measurements, and photos. We'll confirm your order and assign a drafting coordinator within 4 business hours.
We Draft Your Plans
Our CAD team converts your measurements into precise, scaled floor plans — formatted for Florence's building department and AZ code standards. Delivered in 10 business days.
Download and Use
Receive your drawings in PDF and DWG format — ready for permit submittal, contractor bidding, listing agents, appraisers, or HOA submission.
Common Questions
Florence Floor Plan Drafting FAQs
When do I need professionally drafted floor plans in Florence? +
You need accurate floor plans for: permit applications (required by Florence's building department for any structural work), refinancing or home equity loans, selling your home (accurate square footage documentation), renovation contractor bidding, HOA design review submissions, and insurance claims. Our as-built drawings capture your home's exact current dimensions.
What is an as-built floor plan and why do I need one in Florence? +
An as-built floor plan documents your home as it currently exists — including all room dimensions, door and window locations, wall thicknesses, and square footage. These are required when the original permit drawings are unavailable or the home was modified without permits. Florence's building department requires accurate as-builts when you apply for renovation or addition permits on older homes.
How much does floor plan drafting cost in Florence? +
Our floor plan drafting packages for Florence start at $997 for a standard residential home. This includes measured floor plans for all levels, room labels, door and window schedules, and verified square footage. Local drafting services typically charge $1,500–$4,000 for the same work. We deliver within 10 business days with a 14-day money-back guarantee.
How do you create floor plans remotely for my Florence home? +
You provide basic measurements (room dimensions, door/window sizes) and photos of each room. Our drafting team converts these into accurate CAD drawings with precise dimensions, wall thicknesses, and notations. For permit-grade as-built drawings, we may request additional measurements or a site visit from a local partner. We serve all Florence neighborhoods remotely.
What format are the floor plan drawings delivered in? +
We deliver drawings in PDF (for printing and permit submission) and DWG/DXF (AutoCAD-compatible format for contractors, engineers, and architects to work from). All drawings are formatted to Florence building department standards and include title block, scale, and code notations required for permit submission.
Can you draft floor plans for a rental property or multi-unit building in Florence? +
Yes — we draft floor plans for single-family homes, duplexes, triplexes, ADUs, condos, and small commercial properties in Florence. Multi-unit buildings are priced based on the total number of units and floors. Contact us for a custom quote if your property has more than 4 units.
Will accurate floor plans increase my home's value in Florence? +
In Florence, where median home values are around $270,000, inaccurate or missing square footage records can suppress list price and appraisal value. Professional as-built drawings establish defensible square footage for appraisers and buyers. Unpermitted additions documented and legitimized through permit drawings can recover thousands in appraised value.
Do I need floor plans to get an ADU or addition permit in Florence? +
Yes — Florence's building department requires accurate floor plans as part of any ADU, garage conversion, or addition permit application. Our packages combine floor plan drafting with the full permit-ready drawing set (site plan, elevations, electrical, Title 24) needed for plan check submittal. If you only need the floor plans themselves, our Starter package covers that.
Can you draft floor plans from old blueprints or photos in Florence? +
Yes — we can redraft from original blueprints, scans of old permit sets, hand-drawn sketches, or room photos combined with your measurements. We regularize old drawings to current CAD standards and update them to reflect any modifications made since original construction. This is a common service for Florence homes built before the 1990s.
Nearby Cities
Also Available in Florence
Planning to build an ADU? See our ADU design service.
Next Steps
Ready to Move Forward With Your Florence ADU?
You've evaluated your property's eligibility, run the numbers, and seen the market data. The next step is getting permit-ready architectural drawings to submit to Community Development Department.
Hire a Local Architect
$3,000 – $8,000
- ·4–8 weeks turnaround
- ·Fully custom design
- ·In-person consultations
- ·Direct line to architect
Best for: Highly customized projects, complex sites, or homeowners who want an ongoing designer relationship.
Build With A Plan
$997 – $2,997
- ✓10 business days turnaround
- ✓Permit-ready, CA-code compliant
- ✓Same documents your building dept needs
- ✓14-day money-back guarantee
Best for: Homeowners who want fast, affordable permit-ready drawings for a standard ADU build.
Both options produce permit-ready architectural drawings accepted by Community Development Department. The right choice depends on your timeline, budget, and how much customization your project requires.