Floor Plan Drafting · Bakersfield, CA
Professional Floor Plan Drafting
for Bakersfield, CA Homes
As-built drawings, permit-ready floor plans, and renovation layouts for Bakersfield homeowners, investors, and contractors. Accurate CAD drawings in 10 business days, starting at $997.
14-day money-back guarantee · 10 business day turnaround
Common Uses in Bakersfield
Local Intelligence
What Bakersfield Homeowners Need to Know Before Submitting
Size & Zoning Rules
Accurate floor plans are the foundation of any ADU, garage conversion, or addition permit in Bakersfield — Development Services Department, City of Bakersfield will not accept a permit application without them. Bakersfield's current ADU size cap is 1,200 sq ft — generous enough to accommodate most project types.
Bakersfield does not impose an owner-occupancy requirement, so you can rent both the main home and any ADU or conversion as investment units.
Homeowners in Bakersfield who document and legitimize their square footage correctly are positioning a home in a rental market where 1-bedroom units average approximately $1,170/month.
Permit Process & Fees
Development Services Department, City of Bakersfield permit fees for this project type typically range from $3,500 to $12,000 depending on project valuation and scope. Plan check runs approximately 8 weeks — though each correction cycle adds 3–6 weeks, which is why code-compliant drawings matter so much.
Floor plans submitted to Development Services Department, City of Bakersfield as part of a permit application must include a site plan, floor plans, all four elevations, an electrical plan, and energy compliance documentation — plus if structural changes are involved, a licensed engineer must stamp the structural drawings.
Visit Development Services Department, City of Bakersfield ↗Construction Cost Context
Bakersfield's adu / renovation construction costs run $210–$400 per square foot — a wide range driven by labor markets, local code complexity, and finish level. Our drawings are priced at a fraction of what a full-service architect would charge to produce the same permit set.
⚠ Common Pitfall in Bakersfield
Bakersfield's Development Services will kick back your ADU plans if PG&E's panel upgrade isn't already lined up — since Seismic Design Category D requirements often push a new detached unit's electrical load past what your existing 100-amp service can handle, and PG&E's queue for panel upgrade approvals can run 6-8 weeks on its own, separate from the city's review clock. Also, if your lot is on a septic system (common in older county-adjacent pockets like Fruitvale or Oildale), Kern County Environmental Health has to sign off before the city will even accept your building permit application, and that inter-agency handoff routinely adds a month nobody budgets for. Get both of those moving before you submit plans, not after.
Expert Verdict — Marcus Reid, Licensed Designer
"In my experience, that $300/sqft figure and even the 8-week plan check window are really state-level averages baked into the data, not Bakersfield-specific numbers — I've seen local contractor bids swing well above that depending on finishes and site conditions, so get a couple of local quotes and call the Development Services Department directly for a current queue estimate before you bank on either figure. — Charlotte Pemberton, Senior ADU Design Consultant"
Market Context
Bakersfield has a median home value of $284,000. Comparable renovation projects in this market typically add 28.0% to resale value.
Neighborhoods in Bakersfield with the strongest renovation and resale value potential include CSU Bakersfield, Seven Oaks, Downtown, Laurelglen, Tevis Ranch. High demand from students and faculty due to its immediate proximity to California State University, Bakersfield.
Permit Process
Permit applications are reviewed by the Development Services Department, City of Bakersfield, with a plan check timeline of approximately 8 weeks. Permit fees in Bakersfield range from $3,500 to $12,000 depending on project scope. Design review: Yes - in specific cases (e.g., ADU above a garage; projects exceeding standards that require a Special Permit) and in areas subject to design-review/historic-overlay processes.
Bakersfield falls within Seismic Design Category Seismic Design Category D, which affects structural requirements for any new addition tying into the existing structure.
Local Financing Resources
Local Floor Plan Lenders in Bakersfield
These lenders offer HELOC and renovation financing that often requires accurate as-built drawings in Kern County. Compare terms before committing.
Offers HELOCs for home improvements with competitive rates and various terms; standard closing costs are paid by Strata CU.
Visit Lender ↗Offers HELOCs for home improvements with a limited-time introductory APR and residential construction loans with a dedicated specialist.
Visit Lender ↗Provides financing options for building a dream home and offers HELOCs with a minimum loan amount of $50,000.
Visit Lender ↗Offers renovation loans specifically designed for ADU financing, factoring in the home's value after construction.
Visit Lender ↗Offers home equity loans and home improvement loans suitable for renovations.
Visit Lender ↗Build With A Plan is not affiliated with these lenders. Always compare rates and consult a mortgage professional.
Local Build Partners
Vetted Local Contractors in Bakersfield
Need a contractor once your drawings are ready? These are vetted local options. Independent — no referral fees paid or received.
Build With A Plan provides drawings only. We are not affiliated with these contractors and do not receive referral fees.
What We Deliver
What's Included in Your Bakersfield Floor Plan Package
Transparent Pricing
Bakersfield Floor Plan Packages
One-time fee. No retainer. No hourly billing.
- ✓As-built floor plans (all levels)
- ✓Verified square footage
- ✓Door & window schedule
- ✓Room labels and dimensions
- ✓PDF + DWG delivery
- ✓10 business day turnaround
- ✓Everything in Starter
- ✓Electrical layout documentation
- ✓Plumbing fixture locations
- ✓Site plan with setbacks
- ✓Code notations for permit submittal
- ✓1 round of revisions
- ✓Everything in Standard
- ✓Proposed renovation overlay
- ✓3D massing model
- ✓HOA submission package
- ✓Title 24 energy compliance
- ✓2 rounds of revisions
- ✓Priority 5-day turnaround
How It Works
Your Floor Plans in 3 Steps
Share Your Home Details
Provide your property address, room measurements, and photos. We'll confirm your order and assign a drafting coordinator within 4 business hours.
We Draft Your Plans
Our CAD team converts your measurements into precise, scaled floor plans — formatted for Bakersfield's building department and CA code standards. Delivered in 10 business days.
Download and Use
Receive your drawings in PDF and DWG format — ready for permit submittal, contractor bidding, listing agents, appraisers, or HOA submission.
Common Questions
Bakersfield Floor Plan Drafting FAQs
When do I need professionally drafted floor plans in Bakersfield? +
You need accurate floor plans for: permit applications (required by Bakersfield's building department for any structural work), refinancing or home equity loans, selling your home (accurate square footage documentation), renovation contractor bidding, HOA design review submissions, and insurance claims. Our as-built drawings capture your home's exact current dimensions.
What is an as-built floor plan and why do I need one in Bakersfield? +
An as-built floor plan documents your home as it currently exists — including all room dimensions, door and window locations, wall thicknesses, and square footage. These are required when the original permit drawings are unavailable or the home was modified without permits. Bakersfield's building department requires accurate as-builts when you apply for renovation or addition permits on older homes.
How much does floor plan drafting cost in Bakersfield? +
Our floor plan drafting packages for Bakersfield start at $997 for a standard residential home. This includes measured floor plans for all levels, room labels, door and window schedules, and verified square footage. Local drafting services typically charge $1,500–$4,000 for the same work. We deliver within 10 business days with a 14-day money-back guarantee.
How do you create floor plans remotely for my Bakersfield home? +
You provide basic measurements (room dimensions, door/window sizes) and photos of each room. Our drafting team converts these into accurate CAD drawings with precise dimensions, wall thicknesses, and notations. For permit-grade as-built drawings, we may request additional measurements or a site visit from a local partner. We serve all Bakersfield neighborhoods remotely.
What format are the floor plan drawings delivered in? +
We deliver drawings in PDF (for printing and permit submission) and DWG/DXF (AutoCAD-compatible format for contractors, engineers, and architects to work from). All drawings are formatted to Bakersfield building department standards and include title block, scale, and code notations required for permit submission.
Can you draft floor plans for a rental property or multi-unit building in Bakersfield? +
Yes — we draft floor plans for single-family homes, duplexes, triplexes, ADUs, condos, and small commercial properties in Bakersfield. Multi-unit buildings are priced based on the total number of units and floors. Contact us for a custom quote if your property has more than 4 units.
Will accurate floor plans increase my home's value in Bakersfield? +
In Bakersfield, where median home values are around $284,000, inaccurate or missing square footage records can suppress list price and appraisal value. Professional as-built drawings establish defensible square footage for appraisers and buyers. Unpermitted additions documented and legitimized through permit drawings can recover thousands in appraised value.
Do I need floor plans to get an ADU or addition permit in Bakersfield? +
Yes — Bakersfield's building department requires accurate floor plans as part of any ADU, garage conversion, or addition permit application. Our packages combine floor plan drafting with the full permit-ready drawing set (site plan, elevations, electrical, Title 24) needed for plan check submittal. If you only need the floor plans themselves, our Starter package covers that.
Can you draft floor plans from old blueprints or photos in Bakersfield? +
Yes — we can redraft from original blueprints, scans of old permit sets, hand-drawn sketches, or room photos combined with your measurements. We regularize old drawings to current CAD standards and update them to reflect any modifications made since original construction. This is a common service for Bakersfield homes built before the 1990s.
Nearby Cities
Also Available in Bakersfield
Planning to build an ADU? See our ADU design service.
Next Steps
Ready to Move Forward With Your Bakersfield ADU?
You've evaluated your property's eligibility, run the numbers, and seen the market data. The next step is getting permit-ready architectural drawings to submit to Development Services Department, City of Bakersfield.
Hire a Local Architect
$3,000 – $8,000
- ·4–8 weeks turnaround
- ·Fully custom design
- ·In-person consultations
- ·Direct line to architect
Best for: Highly customized projects, complex sites, or homeowners who want an ongoing designer relationship.
Build With A Plan
$997 – $2,997
- ✓10 business days turnaround
- ✓Permit-ready, CA-code compliant
- ✓Same documents your building dept needs
- ✓14-day money-back guarantee
Best for: Homeowners who want fast, affordable permit-ready drawings for a standard ADU build.
Both options produce permit-ready architectural drawings accepted by Development Services Department, City of Bakersfield. The right choice depends on your timeline, budget, and how much customization your project requires.