Floor Plan Drafting · Burbank, CA
Professional Floor Plan Drafting
for Burbank, CA Homes
As-built drawings, permit-ready floor plans, and renovation layouts for Burbank homeowners, investors, and contractors. Accurate CAD drawings in 10 business days, starting at $997.
14-day money-back guarantee · 10 business day turnaround
Common Uses in Burbank
Local Intelligence
What Burbank Homeowners Need to Know Before Submitting
Size & Zoning Rules
Accurate floor plans are the foundation of any ADU, garage conversion, or addition permit in Burbank — Building & Safety Division will not accept a permit application without them. Burbank's current ADU size cap is 1,000 sq ft — within the typical range for most floor plan configurations.
Burbank does not impose an owner-occupancy requirement, so you can rent both the main home and any ADU or conversion as investment units.
Homeowners in Burbank who document and legitimize their square footage correctly are positioning a home in a rental market where 1-bedroom units average approximately $2,230/month.
Permit Process & Fees
Building & Safety Division permit fees for this project type typically range from $16,019 to $22,603 depending on project valuation and scope. Plan check runs approximately 11 weeks — though each correction cycle adds 3–6 weeks, which is why code-compliant drawings matter so much.
Floor plans submitted to Building & Safety Division as part of a permit application must include a site plan, floor plans, all four elevations, an electrical plan, and energy compliance documentation — plus if structural changes are involved, a licensed engineer must stamp the structural drawings.
Visit Building & Safety Division ↗Construction Cost Context
Burbank's adu / renovation construction costs run $298–$490 per square foot — a wide range driven by labor markets, local code complexity, and finish level. Our drawings are priced at a fraction of what a full-service architect would charge to produce the same permit set.
⚠ Common Pitfall in Burbank
Burbank's Building & Safety Division requires a separate Fire Department plan check for any ADU near the hillside areas bordering the Verdugo Mountains, and if you're in one of those Very High Fire Hazard Severity Zones, you'll need ignition-resistant materials and defensible space clearance that most contractors don't price into their initial bids. Because Burbank sits in Seismic Zone D, expect the plan checker to scrutinize your structural calculations closely if you're attaching the ADU to an older existing garage — many of those built before the 1990s need retrofit work just to meet current shear wall requirements. Also, Burbank Water and Power (not a private utility) handles all electrical upgrades, and their queue for new panel or service upgrades tied to ADU permits often runs longer than the actual building permit itself.
Expert Verdict — Marcus Reid, Licensed Designer
"In my experience, that 11-week plan check and $425/sqft figure are Burbank state-level estimates rather than verified local numbers, so I'd get quotes from at least two Burbank-based contractors and call the Building & Safety Division directly before penciling in a budget or start date. What the data doesn't show is how much a clean, complete drawing set matters — I've seen straightforward projects sail through in that window and incomplete submittals drag on for months."
Market Context
Burbank has a median home value of $870,000. Comparable renovation projects in this market typically add 28% to resale value.
Neighborhoods in Burbank with the strongest renovation and resale value potential include Media District, Magnolia Park, Rancho Equestrian, Chandler Park, Hillside District. Very high rental demand from Warner Bros./Disney studios and many single-family and new multi-family homes make ADUs highly rentable.
Permit Process
Permit applications are reviewed by the Building & Safety Division, with a plan check timeline of approximately 11 weeks. Permit fees in Burbank range from $16,019 to $22,603 depending on project scope. Design review: Yes - in historic districts only.
Burbank falls within Seismic Design Category D, which affects structural requirements for any new addition tying into the existing structure.
Local Financing Resources
Local Floor Plan Lenders in Burbank
These lenders offer HELOC and renovation financing that often requires accurate as-built drawings in Los Angeles County. Compare terms before committing.
Intro APR as low as 4.99% with HELOC limits reported up to $500,000; membership required (CA/AZ/NV).
Visit Lender ↗Local Burbank bank HELOC page showing sample variable APRs by amount (e.g., 6.75%–7.50% in current table).
Visit Lender ↗Offers HELOC and fixed home equity loans in CA (HELOC available for CA properties); used commonly for renovations.
Visit Lender ↗Home equity product advertised with rates 'as low as 5.99% APR' and targeted for home improvements.
Visit Lender ↗Fintech that arranges ADU/renovation financing through credit union partners; cites sample variable-rate RenoFi HELOC (10-year draw, 15-year repayment).
Visit Lender ↗Build With A Plan is not affiliated with these lenders. Always compare rates and consult a mortgage professional.
Local Build Partners
Vetted Local Contractors in Burbank
Need a contractor once your drawings are ready? These are vetted local options. Independent — no referral fees paid or received.
Build With A Plan provides drawings only. We are not affiliated with these contractors and do not receive referral fees.
What We Deliver
What's Included in Your Burbank Floor Plan Package
Transparent Pricing
Burbank Floor Plan Packages
One-time fee. No retainer. No hourly billing.
- ✓As-built floor plans (all levels)
- ✓Verified square footage
- ✓Door & window schedule
- ✓Room labels and dimensions
- ✓PDF + DWG delivery
- ✓10 business day turnaround
- ✓Everything in Starter
- ✓Electrical layout documentation
- ✓Plumbing fixture locations
- ✓Site plan with setbacks
- ✓Code notations for permit submittal
- ✓1 round of revisions
- ✓Everything in Standard
- ✓Proposed renovation overlay
- ✓3D massing model
- ✓HOA submission package
- ✓Title 24 energy compliance
- ✓2 rounds of revisions
- ✓Priority 5-day turnaround
How It Works
Your Floor Plans in 3 Steps
Share Your Home Details
Provide your property address, room measurements, and photos. We'll confirm your order and assign a drafting coordinator within 4 business hours.
We Draft Your Plans
Our CAD team converts your measurements into precise, scaled floor plans — formatted for Burbank's building department and CA code standards. Delivered in 10 business days.
Download and Use
Receive your drawings in PDF and DWG format — ready for permit submittal, contractor bidding, listing agents, appraisers, or HOA submission.
Common Questions
Burbank Floor Plan Drafting FAQs
When do I need professionally drafted floor plans in Burbank? +
You need accurate floor plans for: permit applications (required by Burbank's building department for any structural work), refinancing or home equity loans, selling your home (accurate square footage documentation), renovation contractor bidding, HOA design review submissions, and insurance claims. Our as-built drawings capture your home's exact current dimensions.
What is an as-built floor plan and why do I need one in Burbank? +
An as-built floor plan documents your home as it currently exists — including all room dimensions, door and window locations, wall thicknesses, and square footage. These are required when the original permit drawings are unavailable or the home was modified without permits. Burbank's building department requires accurate as-builts when you apply for renovation or addition permits on older homes.
How much does floor plan drafting cost in Burbank? +
Our floor plan drafting packages for Burbank start at $997 for a standard residential home. This includes measured floor plans for all levels, room labels, door and window schedules, and verified square footage. Local drafting services typically charge $1,500–$4,000 for the same work. We deliver within 10 business days with a 14-day money-back guarantee.
How do you create floor plans remotely for my Burbank home? +
You provide basic measurements (room dimensions, door/window sizes) and photos of each room. Our drafting team converts these into accurate CAD drawings with precise dimensions, wall thicknesses, and notations. For permit-grade as-built drawings, we may request additional measurements or a site visit from a local partner. We serve all Burbank neighborhoods remotely.
What format are the floor plan drawings delivered in? +
We deliver drawings in PDF (for printing and permit submission) and DWG/DXF (AutoCAD-compatible format for contractors, engineers, and architects to work from). All drawings are formatted to Burbank building department standards and include title block, scale, and code notations required for permit submission.
Can you draft floor plans for a rental property or multi-unit building in Burbank? +
Yes — we draft floor plans for single-family homes, duplexes, triplexes, ADUs, condos, and small commercial properties in Burbank. Multi-unit buildings are priced based on the total number of units and floors. Contact us for a custom quote if your property has more than 4 units.
Will accurate floor plans increase my home's value in Burbank? +
In Burbank, where median home values are around $870,000, inaccurate or missing square footage records can suppress list price and appraisal value. Professional as-built drawings establish defensible square footage for appraisers and buyers. Unpermitted additions documented and legitimized through permit drawings can recover thousands in appraised value.
Do I need floor plans to get an ADU or addition permit in Burbank? +
Yes — Burbank's building department requires accurate floor plans as part of any ADU, garage conversion, or addition permit application. Our packages combine floor plan drafting with the full permit-ready drawing set (site plan, elevations, electrical, Title 24) needed for plan check submittal. If you only need the floor plans themselves, our Starter package covers that.
Can you draft floor plans from old blueprints or photos in Burbank? +
Yes — we can redraft from original blueprints, scans of old permit sets, hand-drawn sketches, or room photos combined with your measurements. We regularize old drawings to current CAD standards and update them to reflect any modifications made since original construction. This is a common service for Burbank homes built before the 1990s.
Nearby Cities
Also Available in Burbank
Planning to build an ADU? See our ADU design service.
Next Steps
Ready to Move Forward With Your Burbank ADU?
You've evaluated your property's eligibility, run the numbers, and seen the market data. The next step is getting permit-ready architectural drawings to submit to Building & Safety Division.
Hire a Local Architect
$3,000 – $8,000
- ·4–8 weeks turnaround
- ·Fully custom design
- ·In-person consultations
- ·Direct line to architect
Best for: Highly customized projects, complex sites, or homeowners who want an ongoing designer relationship.
Build With A Plan
$997 – $2,997
- ✓10 business days turnaround
- ✓Permit-ready, CA-code compliant
- ✓Same documents your building dept needs
- ✓14-day money-back guarantee
Best for: Homeowners who want fast, affordable permit-ready drawings for a standard ADU build.
Both options produce permit-ready architectural drawings accepted by Building & Safety Division. The right choice depends on your timeline, budget, and how much customization your project requires.