Floor Plan Drafting · Sunrise, FL
Professional Floor Plan Drafting
for Sunrise, FL Homes
As-built drawings, permit-ready floor plans, and renovation layouts for Sunrise homeowners, investors, and contractors. Accurate CAD drawings in 10 business days, starting at $997.
14-day money-back guarantee · 10 business day turnaround
Common Uses in Sunrise
Local Intelligence
What Sunrise Homeowners Need to Know Before Submitting
Size & Zoning Rules
0Sunrise does not impose an owner-occupancy requirement, so you can rent both the main home and any ADU or conversion as investment units.
Homeowners in Sunrise who document and legitimize their square footage correctly are positioning a home in a rental market where 1-bedroom units average approximately $1,700/month.
Permit Process & Fees
Building Division permit fees for this project type typically range from $5,973 to $14,869 depending on project valuation and scope. Plan check runs approximately 7 weeks — though each correction cycle adds 3–6 weeks, which is why code-compliant drawings matter so much.
Floor plans submitted to Building Division as part of a permit application must include a site plan, floor plans, all four elevations, an electrical plan, and energy compliance documentation — plus if structural changes are involved, a licensed engineer must stamp the structural drawings.
Visit Building Division ↗Construction Cost Context
Sunrise's adu / renovation construction costs run $190–$285 per square foot — a moderate range driven by labor markets, local code complexity, and finish level. Our drawings are priced at a fraction of what a full-service architect would charge to produce the same permit set.
⚠ Common Pitfall in Sunrise
Sunrise's Building Division routes every ADU through Broward County's separate plumbing and electrical sub-permit process, which means your contractor is juggling two different inspection schedules instead of one — and a missed county inspection slot can add 1-2 weeks of dead time waiting for the next opening. Many Sunrise neighborhoods still have older 4-inch lateral sewer lines from the 1970s-80s build-out, so Broward County Water and Wastewater Services often requires a video camera inspection of your existing lateral before approving the new ADU connection, and that footage sometimes reveals root intrusion or pipe degradation that turns into a surprise $5,000-$10,000 replacement. If your lot sits in one of Sunrise's platted subdivisions with recorded HOA covenants (common in the Sunrise Golf Village and Sunrise Lakes areas), the HOA architectural review can run parallel to the city process but has its own setback and roofline rules that are sometimes stricter than city zoning — getting city approval doesn't guarantee HOA sign-off.
Expert Verdict — Marcus Reid, Licensed Designer
"In my experience, that $240/sqft and 7-week timeline are Sunrise state-level estimates, not Sunrise-specific numbers, so I'd get at least two local contractor quotes and call Sunrise Building Division directly before penciling in a budget or start date. Also, 7 weeks assumes a clean, complete drawing set on first submittal — I've seen plenty of projects stretch past 12 weeks once corrections and re-review cycles come into play."
Market Context
Sunrise has a median home value of $355,000. Comparable renovation projects in this market typically add 25% to resale value.
Neighborhoods in Sunrise with the strongest renovation and resale value potential include Plantation Acres, Sunrise Golf Village West, Savannah, Sawgrass, New River Estates. Very large lots and low-density single-family parcels make detached ADUs feasible and straightforward to site.
Permit Process
Permit applications are reviewed by the Building Division, with a plan check timeline of approximately 7 weeks. Permit fees in Sunrise range from $5,973 to $14,869 depending on project scope.
Sunrise falls within Seismic Design Category Seismic Design Category A (SDC A) per ASCE 7 — low seismicity; verify site-specific SDC using ASCE Hazard Tool/USGS design ground motions, which affects structural requirements for any new addition tying into the existing structure.
Local Financing Resources
Local Floor Plan Lenders in Sunrise
These lenders offer HELOC and renovation financing that often requires accurate as-built drawings in Broward County. Compare terms before committing.
Offers a 10-year draw period with no closing costs for loans of $10,000 or greater.
Visit Lender ↗Allows borrowing up to 80% of home equity for repairs and renovations.
Visit Lender ↗Provides a 'No Closing Cost' Home Equity Line of Credit suitable for home remodeling.
Visit Lender ↗Offers construction-to-permanent loans with a single closing for building projects across Florida.
Visit Lender ↗A fintech platform partnering with credit unions to offer specialized renovation HELOCs and home equity products.
Visit Lender ↗Build With A Plan is not affiliated with these lenders. Always compare rates and consult a mortgage professional.
Local Build Partners
Vetted Local Contractors in Sunrise
Need a contractor once your drawings are ready? These are vetted local options. Independent — no referral fees paid or received.
Build With A Plan provides drawings only. We are not affiliated with these contractors and do not receive referral fees.
What We Deliver
What's Included in Your Sunrise Floor Plan Package
Transparent Pricing
Sunrise Floor Plan Packages
One-time fee. No retainer. No hourly billing.
- ✓As-built floor plans (all levels)
- ✓Verified square footage
- ✓Door & window schedule
- ✓Room labels and dimensions
- ✓PDF + DWG delivery
- ✓10 business day turnaround
- ✓Everything in Starter
- ✓Electrical layout documentation
- ✓Plumbing fixture locations
- ✓Site plan with setbacks
- ✓Code notations for permit submittal
- ✓1 round of revisions
- ✓Everything in Standard
- ✓Proposed renovation overlay
- ✓3D massing model
- ✓HOA submission package
- ✓Title 24 energy compliance
- ✓2 rounds of revisions
- ✓Priority 5-day turnaround
How It Works
Your Floor Plans in 3 Steps
Share Your Home Details
Provide your property address, room measurements, and photos. We'll confirm your order and assign a drafting coordinator within 4 business hours.
We Draft Your Plans
Our CAD team converts your measurements into precise, scaled floor plans — formatted for Sunrise's building department and FL code standards. Delivered in 10 business days.
Download and Use
Receive your drawings in PDF and DWG format — ready for permit submittal, contractor bidding, listing agents, appraisers, or HOA submission.
Common Questions
Sunrise Floor Plan Drafting FAQs
When do I need professionally drafted floor plans in Sunrise? +
You need accurate floor plans for: permit applications (required by Sunrise's building department for any structural work), refinancing or home equity loans, selling your home (accurate square footage documentation), renovation contractor bidding, HOA design review submissions, and insurance claims. Our as-built drawings capture your home's exact current dimensions.
What is an as-built floor plan and why do I need one in Sunrise? +
An as-built floor plan documents your home as it currently exists — including all room dimensions, door and window locations, wall thicknesses, and square footage. These are required when the original permit drawings are unavailable or the home was modified without permits. Sunrise's building department requires accurate as-builts when you apply for renovation or addition permits on older homes.
How much does floor plan drafting cost in Sunrise? +
Our floor plan drafting packages for Sunrise start at $997 for a standard residential home. This includes measured floor plans for all levels, room labels, door and window schedules, and verified square footage. Local drafting services typically charge $1,500–$4,000 for the same work. We deliver within 10 business days with a 14-day money-back guarantee.
How do you create floor plans remotely for my Sunrise home? +
You provide basic measurements (room dimensions, door/window sizes) and photos of each room. Our drafting team converts these into accurate CAD drawings with precise dimensions, wall thicknesses, and notations. For permit-grade as-built drawings, we may request additional measurements or a site visit from a local partner. We serve all Sunrise neighborhoods remotely.
What format are the floor plan drawings delivered in? +
We deliver drawings in PDF (for printing and permit submission) and DWG/DXF (AutoCAD-compatible format for contractors, engineers, and architects to work from). All drawings are formatted to Sunrise building department standards and include title block, scale, and code notations required for permit submission.
Can you draft floor plans for a rental property or multi-unit building in Sunrise? +
Yes — we draft floor plans for single-family homes, duplexes, triplexes, ADUs, condos, and small commercial properties in Sunrise. Multi-unit buildings are priced based on the total number of units and floors. Contact us for a custom quote if your property has more than 4 units.
Will accurate floor plans increase my home's value in Sunrise? +
In Sunrise, where median home values are around $355,000, inaccurate or missing square footage records can suppress list price and appraisal value. Professional as-built drawings establish defensible square footage for appraisers and buyers. Unpermitted additions documented and legitimized through permit drawings can recover thousands in appraised value.
Do I need floor plans to get an ADU or addition permit in Sunrise? +
Yes — Sunrise's building department requires accurate floor plans as part of any ADU, garage conversion, or addition permit application. Our packages combine floor plan drafting with the full permit-ready drawing set (site plan, elevations, electrical, Title 24) needed for plan check submittal. If you only need the floor plans themselves, our Starter package covers that.
Can you draft floor plans from old blueprints or photos in Sunrise? +
Yes — we can redraft from original blueprints, scans of old permit sets, hand-drawn sketches, or room photos combined with your measurements. We regularize old drawings to current CAD standards and update them to reflect any modifications made since original construction. This is a common service for Sunrise homes built before the 1990s.
Nearby Cities
Also Available in Sunrise
Planning to build an ADU? See our ADU design service.
Next Steps
Ready to Move Forward With Your Sunrise ADU?
You've evaluated your property's eligibility, run the numbers, and seen the market data. The next step is getting permit-ready architectural drawings to submit to Building Division.
Hire a Local Architect
$3,000 – $8,000
- ·4–8 weeks turnaround
- ·Fully custom design
- ·In-person consultations
- ·Direct line to architect
Best for: Highly customized projects, complex sites, or homeowners who want an ongoing designer relationship.
Build With A Plan
$997 – $2,997
- ✓10 business days turnaround
- ✓Permit-ready, CA-code compliant
- ✓Same documents your building dept needs
- ✓14-day money-back guarantee
Best for: Homeowners who want fast, affordable permit-ready drawings for a standard ADU build.
Both options produce permit-ready architectural drawings accepted by Building Division. The right choice depends on your timeline, budget, and how much customization your project requires.