Professional Floor Plan Drafting
for Weston, FL Homes

As-built drawings, permit-ready floor plans, and renovation layouts for Weston homeowners, investors, and contractors. Accurate CAD drawings in 10 business days, starting at $997.

Get Your Floor Plans → Floor Plan FAQ ↓

14-day money-back guarantee · 10 business day turnaround

Common Uses in Weston

📋
Permit Applications
🏡
Home Listings & Resale
🔧
Renovation Planning
🏦
Refinancing & Loans
📐
As-Built Documentation
🏢
HOA Submissions

What Weston Homeowners Need to Know Before Submitting

Size & Zoning Rules

0

Weston does not impose an owner-occupancy requirement, so you can rent both the main home and any ADU or conversion as investment units.

Homeowners in Weston who document and legitimize their square footage correctly are positioning a home in a rental market where 1-bedroom units average approximately $2,047/month.

Permit Process & Fees

Building Department permit fees for this project type typically range from $12,878 to $19,590 depending on project valuation and scope. Plan check runs approximately 7 weeks — though each correction cycle adds 3–6 weeks, which is why code-compliant drawings matter so much.

Floor plans submitted to Building Department as part of a permit application must include a site plan, floor plans, all four elevations, an electrical plan, and energy compliance documentation — plus if structural changes are involved, a licensed engineer must stamp the structural drawings.

Visit Building Department ↗

Construction Cost Context

Weston's adu / renovation construction costs run $245–$392 per square foot — a wide range driven by labor markets, local code complexity, and finish level. Our drawings are priced at a fraction of what a full-service architect would charge to produce the same permit set.

⚠ Common Pitfall in Weston

Most Weston neighborhoods fall under Indian Trace or Bonaventure Development District HOA rules, which often have separate architectural review boards that can take 4-6 weeks on top of city permitting — and some deed restrictions still technically prohibit detached structures altogether, requiring a variance request before you even file with Broward County. Because Weston enforces strict single-family zoning through its Development Standards, your ADU's exterior materials and roofline typically must match the primary home almost exactly, which can send simple pre-fab or modular ADU plans back to the drawing board. Since STRs aren't allowed, you'll also need to prove long-term rental or family-use intent on your application, which some reviewers scrutinize closely if the ADU has a separate entrance and kitchen.

Expert Verdict — Marcus Reid, Licensed Designer

"In my experience with Weston submittals, that 7-week plan check figure is a state-level estimate, and with 80% of the housing stock under HOA review, I'd budget extra time for architectural approval before the county clock even starts—call the Building Department directly for current queue times. On the cost side, $350/sqft is also a broad estimate; I've seen actual bids swing 15-20% in either direction depending on foundation type and finish level, so get two or three local contractor quotes before you set a budget."

Market Context

Weston has a median home value of $550,000. Comparable renovation projects in this market typically add 25% to resale value.

Neighborhoods in Weston with the strongest renovation and resale value potential include Emerald Estates, Country Isles, Isles at Weston, The Ridges, The Springs. High single-family density near Weston Town Center with moderate prices and typical lot sizes suitable for detached ADUs.

Permit Process

Permit applications are reviewed by the Building Department, with a plan check timeline of approximately 7 weeks. Permit fees in Weston range from $12,878 to $19,590 depending on project scope. Design review: Yes - citywide (Development Permit / Planning & Zoning administrative review required).

Weston falls within Seismic Design Category A, which affects structural requirements for any new addition tying into the existing structure.

Local Floor Plan Lenders in Weston

These lenders offer HELOC and renovation financing that often requires accurate as-built drawings in Broward County. Compare terms before committing.

Bank of Weston
Construction loan

Local Weston bank listing Construction Loans among mortgage products; contact branch for typical loan sizes and rates.

Visit Lender ↗
Suncoast Credit Union
HELOC

Offers HELOCs for Florida primary residences; APRs advertised ‘As Low As 6.60%’, 10-year draw/15-year max repayment and up to $1,000 toward closing costs.

Visit Lender ↗
Florida Credit Union (FCU)
HELOC

Home Equity Line of Credit product with variable rates, 10-year draw period, no closing costs for loans $10,000+ (per site).

Visit Lender ↗
Seacoast Bank
Construction loan

Regional Florida bank that offers construction lending and local branches (branch locator on site) — contact the Weston-area branch for specifics.

Visit Lender ↗
RenoFi (specialty renovation/ADU financing via partners)
Renovation loan

RenoFi arranges renovation/ADU loans (HELOCs, HELOANs, renovation loans) via partner credit unions; loan sizes shown $10k–$750k and up to 90% of home value or after-renovation value.

Visit Lender ↗

Build With A Plan is not affiliated with these lenders. Always compare rates and consult a mortgage professional.

Vetted Local Contractors in Weston

Need a contractor once your drawings are ready? These are vetted local options. Independent — no referral fees paid or received.

Full Service USA
Home addition★ 4.8 (94)
View Contractor ↗
Garza Contractors LLC
Home addition★ 5 (52)
View Contractor ↗
A V I Contractors (AVI Contractors)
All★ 4.6 (28)
(954) 385-7339
View Contractor ↗
Cosugas
Home addition★ 4.5 (22)
(954) 249-6820
View Contractor ↗

Build With A Plan provides drawings only. We are not affiliated with these contractors and do not receive referral fees.

What's Included in Your Weston Floor Plan Package

📐
Measured Floor Plans
All levels drawn to scale with room dimensions, wall thickness, door/window locations, and square footage
🚪
Door & Window Schedule
Complete schedule of all openings with sizes, types, and hardware notations per code
📏
Verified Square Footage
Gross living area calculated per ANSI standards — defensible for appraisals and listings
Electrical Layout (Standard+)
Existing outlet, switch, panel, and fixture locations documented for renovation planning
📁
PDF + DWG Files
Print-ready PDFs for permit submittal and editable DWG/DXF for contractors and engineers
🏷️
Title Block & Notations
Formatted to Weston building department standards with required code references

Weston Floor Plan Packages

One-time fee. No retainer. No hourly billing.

Starter
$997
one-time, no retainer
  • As-built floor plans (all levels)
  • Verified square footage
  • Door & window schedule
  • Room labels and dimensions
  • PDF + DWG delivery
  • 10 business day turnaround
Get Started →
Most Popular
Standard
$1,497
one-time, no retainer
  • Everything in Starter
  • Electrical layout documentation
  • Plumbing fixture locations
  • Site plan with setbacks
  • Code notations for permit submittal
  • 1 round of revisions
Get Started →
Best Value
Premium
$1,997
one-time, no retainer
  • Everything in Standard
  • Proposed renovation overlay
  • 3D massing model
  • HOA submission package
  • Title 24 energy compliance
  • 2 rounds of revisions
  • Priority 5-day turnaround
Get Started →

Your Floor Plans in 3 Steps

01

Share Your Home Details

Provide your property address, room measurements, and photos. We'll confirm your order and assign a drafting coordinator within 4 business hours.

02

We Draft Your Plans

Our CAD team converts your measurements into precise, scaled floor plans — formatted for Weston's building department and FL code standards. Delivered in 10 business days.

03

Download and Use

Receive your drawings in PDF and DWG format — ready for permit submittal, contractor bidding, listing agents, appraisers, or HOA submission.

Weston Floor Plan Drafting FAQs

When do I need professionally drafted floor plans in Weston? +

You need accurate floor plans for: permit applications (required by Weston's building department for any structural work), refinancing or home equity loans, selling your home (accurate square footage documentation), renovation contractor bidding, HOA design review submissions, and insurance claims. Our as-built drawings capture your home's exact current dimensions.

What is an as-built floor plan and why do I need one in Weston? +

An as-built floor plan documents your home as it currently exists — including all room dimensions, door and window locations, wall thicknesses, and square footage. These are required when the original permit drawings are unavailable or the home was modified without permits. Weston's building department requires accurate as-builts when you apply for renovation or addition permits on older homes.

How much does floor plan drafting cost in Weston? +

Our floor plan drafting packages for Weston start at $997 for a standard residential home. This includes measured floor plans for all levels, room labels, door and window schedules, and verified square footage. Local drafting services typically charge $1,500–$4,000 for the same work. We deliver within 10 business days with a 14-day money-back guarantee.

How do you create floor plans remotely for my Weston home? +

You provide basic measurements (room dimensions, door/window sizes) and photos of each room. Our drafting team converts these into accurate CAD drawings with precise dimensions, wall thicknesses, and notations. For permit-grade as-built drawings, we may request additional measurements or a site visit from a local partner. We serve all Weston neighborhoods remotely.

What format are the floor plan drawings delivered in? +

We deliver drawings in PDF (for printing and permit submission) and DWG/DXF (AutoCAD-compatible format for contractors, engineers, and architects to work from). All drawings are formatted to Weston building department standards and include title block, scale, and code notations required for permit submission.

Can you draft floor plans for a rental property or multi-unit building in Weston? +

Yes — we draft floor plans for single-family homes, duplexes, triplexes, ADUs, condos, and small commercial properties in Weston. Multi-unit buildings are priced based on the total number of units and floors. Contact us for a custom quote if your property has more than 4 units.

Will accurate floor plans increase my home's value in Weston? +

In Weston, where median home values are around $550,000, inaccurate or missing square footage records can suppress list price and appraisal value. Professional as-built drawings establish defensible square footage for appraisers and buyers. Unpermitted additions documented and legitimized through permit drawings can recover thousands in appraised value.

Do I need floor plans to get an ADU or addition permit in Weston? +

Yes — Weston's building department requires accurate floor plans as part of any ADU, garage conversion, or addition permit application. Our packages combine floor plan drafting with the full permit-ready drawing set (site plan, elevations, electrical, Title 24) needed for plan check submittal. If you only need the floor plans themselves, our Starter package covers that.

Can you draft floor plans from old blueprints or photos in Weston? +

Yes — we can redraft from original blueprints, scans of old permit sets, hand-drawn sketches, or room photos combined with your measurements. We regularize old drawings to current CAD standards and update them to reflect any modifications made since original construction. This is a common service for Weston homes built before the 1990s.

Nearby Cities

Fort Lauderdale Pembroke Pines Hollywood Miramar

Also Available in Weston

Planning to build an ADU? See our ADU design service.

View ADU Design →

Ready to Move Forward With Your Weston ADU?

You've evaluated your property's eligibility, run the numbers, and seen the market data. The next step is getting permit-ready architectural drawings to submit to Building Department.

🏛️

Hire a Local Architect

$3,000 – $8,000

  • ·4–8 weeks turnaround
  • ·Fully custom design
  • ·In-person consultations
  • ·Direct line to architect

Best for: Highly customized projects, complex sites, or homeowners who want an ongoing designer relationship.

Practical Choice
📐

Build With A Plan

$997 – $2,997

  • 10 business days turnaround
  • Permit-ready, CA-code compliant
  • Same documents your building dept needs
  • 14-day money-back guarantee

Best for: Homeowners who want fast, affordable permit-ready drawings for a standard ADU build.

Both options produce permit-ready architectural drawings accepted by Building Department. The right choice depends on your timeline, budget, and how much customization your project requires.

See Our Drawing Packages ↓ Common Questions ↓