Floor Plan Drafting · Midland, TX
Professional Floor Plan Drafting
for Midland, TX Homes
As-built drawings, permit-ready floor plans, and renovation layouts for Midland homeowners, investors, and contractors. Accurate CAD drawings in 10 business days, starting at $997.
14-day money-back guarantee · 10 business day turnaround
Common Uses in Midland
Local Intelligence
What Midland Homeowners Need to Know Before Submitting
Size & Zoning Rules
Accurate floor plans are the foundation of any ADU, garage conversion, or addition permit in Midland — Development Services will not accept a permit application without them. Midland's current ADU size cap is 1,000 sq ft — within the typical range for most floor plan configurations.
Midland currently requires owner-occupancy on the primary parcel — meaning one of the units (the main home or the ADU/conversion) must be your primary residence.
Homeowners in Midland who document and legitimize their square footage correctly are positioning a home in a rental market where 1-bedroom units average approximately $1,232/month.
Permit Process & Fees
Development Services permit fees for this project type typically range from $2,000 to $8,000 depending on project valuation and scope. Plan check runs approximately 6 weeks — though each correction cycle adds 3–6 weeks, which is why code-compliant drawings matter so much.
Floor plans submitted to Development Services as part of a permit application must include a site plan, floor plans, all four elevations, an electrical plan, and energy compliance documentation — plus if structural changes are involved, a licensed engineer must stamp the structural drawings.
Visit Development Services ↗Construction Cost Context
Midland's adu / renovation construction costs run $180–$450 per square foot — a wide range driven by labor markets, local code complexity, and finish level. Our drawings are priced at a fraction of what a full-service architect would charge to produce the same permit set.
⚠ Common Pitfall in Midland
Midland's Development Services department will flag your ADU application if your lot sits on a septic system rather than city sewer, which is common in older county pockets near the city limits — you'll need a separate review from the Midland County Environmental Health office to confirm the septic can handle the extra load, and that alone can tack on two to three weeks. Also, because Midland sits on top of the Permian Basin, some lots have old oil and gas well easements or plugged well locations on record that the city requires you to disclose and clear before foundation work starts, which surprises a lot of homeowners who didn't know a well was ever there. Since short-term rentals aren't allowed, make sure your ADU plans are labeled and intended for long-term or family use on the permit application, or reviewers will kick it back for clarification.
Expert Verdict — Marcus Reid, Licensed Designer
"In my experience, that 6-week plan check and $220/sqft figure are Midland state-level estimates rather than verified local numbers, so I'd get quotes from at least two Midland contractors and call Development Services directly before penciling in a timeline; even with a coastal overlay off the table, a 6-week estimate is on the optimistic side once you factor in a first-round correction letter, which I see more often than not."
Market Context
Midland has a median home value of $253,000. Comparable renovation projects in this market typically add 22% to resale value.
Neighborhoods in Midland with the strongest renovation and resale value potential include Grassland Estates, Saddle Club, Legends Park, Mockingbird Heights, Trinity. Large single-family lots and high home values make it good for detached ADUs and rental income.
Permit Process
Permit applications are reviewed by the Development Services, with a plan check timeline of approximately 6 weeks. Permit fees in Midland range from $2,000 to $8,000 depending on project scope. Design review: Yes - in historic districts only.
Midland falls within Seismic Design Category Seismic Design Category A, which affects structural requirements for any new addition tying into the existing structure.
Local Financing Resources
Local Floor Plan Lenders in Midland
These lenders offer HELOC and renovation financing that often requires accurate as-built drawings in Midland County. Compare terms before committing.
Local Midland bank mortgage center offering construction-to-permanent options and locally processed mortgage services.
Visit Lender ↗Mortgage lender serving Midland County offering one-time-close and two-time-close construction loans.
Visit Lender ↗Specialty renovation platform offering HELOCs up to $750k based on 90% of after-renovation value (ARV).
Visit Lender ↗Regional West Texas credit union with a Midland mortgage team offering home loan and renovation financing support.
Visit Lender ↗Local Midland credit union offering consumer loan products and home equity options for residents of Midland and Ector counties.
Visit Lender ↗Build With A Plan is not affiliated with these lenders. Always compare rates and consult a mortgage professional.
Local Build Partners
Vetted Local Contractors in Midland
Need a contractor once your drawings are ready? These are vetted local options. Independent — no referral fees paid or received.
Build With A Plan provides drawings only. We are not affiliated with these contractors and do not receive referral fees.
What We Deliver
What's Included in Your Midland Floor Plan Package
Transparent Pricing
Midland Floor Plan Packages
One-time fee. No retainer. No hourly billing.
- ✓As-built floor plans (all levels)
- ✓Verified square footage
- ✓Door & window schedule
- ✓Room labels and dimensions
- ✓PDF + DWG delivery
- ✓10 business day turnaround
- ✓Everything in Starter
- ✓Electrical layout documentation
- ✓Plumbing fixture locations
- ✓Site plan with setbacks
- ✓Code notations for permit submittal
- ✓1 round of revisions
- ✓Everything in Standard
- ✓Proposed renovation overlay
- ✓3D massing model
- ✓HOA submission package
- ✓Title 24 energy compliance
- ✓2 rounds of revisions
- ✓Priority 5-day turnaround
How It Works
Your Floor Plans in 3 Steps
Share Your Home Details
Provide your property address, room measurements, and photos. We'll confirm your order and assign a drafting coordinator within 4 business hours.
We Draft Your Plans
Our CAD team converts your measurements into precise, scaled floor plans — formatted for Midland's building department and TX code standards. Delivered in 10 business days.
Download and Use
Receive your drawings in PDF and DWG format — ready for permit submittal, contractor bidding, listing agents, appraisers, or HOA submission.
Common Questions
Midland Floor Plan Drafting FAQs
When do I need professionally drafted floor plans in Midland? +
You need accurate floor plans for: permit applications (required by Midland's building department for any structural work), refinancing or home equity loans, selling your home (accurate square footage documentation), renovation contractor bidding, HOA design review submissions, and insurance claims. Our as-built drawings capture your home's exact current dimensions.
What is an as-built floor plan and why do I need one in Midland? +
An as-built floor plan documents your home as it currently exists — including all room dimensions, door and window locations, wall thicknesses, and square footage. These are required when the original permit drawings are unavailable or the home was modified without permits. Midland's building department requires accurate as-builts when you apply for renovation or addition permits on older homes.
How much does floor plan drafting cost in Midland? +
Our floor plan drafting packages for Midland start at $997 for a standard residential home. This includes measured floor plans for all levels, room labels, door and window schedules, and verified square footage. Local drafting services typically charge $1,500–$4,000 for the same work. We deliver within 10 business days with a 14-day money-back guarantee.
How do you create floor plans remotely for my Midland home? +
You provide basic measurements (room dimensions, door/window sizes) and photos of each room. Our drafting team converts these into accurate CAD drawings with precise dimensions, wall thicknesses, and notations. For permit-grade as-built drawings, we may request additional measurements or a site visit from a local partner. We serve all Midland neighborhoods remotely.
What format are the floor plan drawings delivered in? +
We deliver drawings in PDF (for printing and permit submission) and DWG/DXF (AutoCAD-compatible format for contractors, engineers, and architects to work from). All drawings are formatted to Midland building department standards and include title block, scale, and code notations required for permit submission.
Can you draft floor plans for a rental property or multi-unit building in Midland? +
Yes — we draft floor plans for single-family homes, duplexes, triplexes, ADUs, condos, and small commercial properties in Midland. Multi-unit buildings are priced based on the total number of units and floors. Contact us for a custom quote if your property has more than 4 units.
Will accurate floor plans increase my home's value in Midland? +
In Midland, where median home values are around $253,000, inaccurate or missing square footage records can suppress list price and appraisal value. Professional as-built drawings establish defensible square footage for appraisers and buyers. Unpermitted additions documented and legitimized through permit drawings can recover thousands in appraised value.
Do I need floor plans to get an ADU or addition permit in Midland? +
Yes — Midland's building department requires accurate floor plans as part of any ADU, garage conversion, or addition permit application. Our packages combine floor plan drafting with the full permit-ready drawing set (site plan, elevations, electrical, Title 24) needed for plan check submittal. If you only need the floor plans themselves, our Starter package covers that.
Can you draft floor plans from old blueprints or photos in Midland? +
Yes — we can redraft from original blueprints, scans of old permit sets, hand-drawn sketches, or room photos combined with your measurements. We regularize old drawings to current CAD standards and update them to reflect any modifications made since original construction. This is a common service for Midland homes built before the 1990s.
Nearby Cities
Also Available in Midland
Planning to build an ADU? See our ADU design service.
Next Steps
Ready to Move Forward With Your Midland ADU?
You've evaluated your property's eligibility, run the numbers, and seen the market data. The next step is getting permit-ready architectural drawings to submit to Development Services.
Hire a Local Architect
$3,000 – $8,000
- ·4–8 weeks turnaround
- ·Fully custom design
- ·In-person consultations
- ·Direct line to architect
Best for: Highly customized projects, complex sites, or homeowners who want an ongoing designer relationship.
Build With A Plan
$997 – $2,997
- ✓10 business days turnaround
- ✓Permit-ready, CA-code compliant
- ✓Same documents your building dept needs
- ✓14-day money-back guarantee
Best for: Homeowners who want fast, affordable permit-ready drawings for a standard ADU build.
Both options produce permit-ready architectural drawings accepted by Development Services. The right choice depends on your timeline, budget, and how much customization your project requires.