Home Addition Drawings · Burbank, CA
Permit-Ready Home Addition
Drawings for Burbank, CA
Expand your home with a permitted room addition, second story, or family room extension. We deliver complete, code-compliant drawing sets for Burbank's building department — in 10 business days, starting at $1,497.
14-day money-back guarantee · 10 business day turnaround
Local Intelligence
What Burbank Homeowners Need to Know Before Submitting
Size & Zoning Rules
Any new square footage added to your Burbank home counts against the same zoning envelope that governs ADU size, meaning large additions may affect your ability to add a future ADU. Burbank's current ADU size cap is 1,000 sq ft — within the typical range for most floor plan configurations.
Burbank does not impose an owner-occupancy requirement, so you can rent both the main home and any ADU or conversion as investment units.
If the addition creates a second unit or is later converted to a rental, Burbank's ADU market supports approximately $2,902/month for a 2-bedroom unit.
Permit Process & Fees
Building & Safety Division permit fees for this project type typically range from $16,019 to $22,603 depending on project valuation and scope. Plan check runs approximately 11 weeks — though each correction cycle adds 3–6 weeks, which is why code-compliant drawings matter so much.
Addition permit packages submitted to Building & Safety Division must include a site plan, floor plans, all four elevations, an electrical plan, and energy compliance documentation — plus stamped structural drawings are always required for any load-bearing elements, second-story work, or new foundation.
Visit Building & Safety Division ↗Construction Cost Context
Burbank's home addition construction costs run $298–$490 per square foot — a wide range driven by labor markets, local code complexity, and finish level. Our drawings are priced at a fraction of what a full-service architect would charge to produce the same permit set.
⚠ Common Pitfall in Burbank
Burbank's Building & Safety Division requires a separate Fire Department plan check for any ADU near the hillside areas bordering the Verdugo Mountains, and if you're in one of those Very High Fire Hazard Severity Zones, you'll need ignition-resistant materials and defensible space clearance that most contractors don't price into their initial bids. Because Burbank sits in Seismic Zone D, expect the plan checker to scrutinize your structural calculations closely if you're attaching the ADU to an older existing garage — many of those built before the 1990s need retrofit work just to meet current shear wall requirements. Also, Burbank Water and Power (not a private utility) handles all electrical upgrades, and their queue for new panel or service upgrades tied to ADU permits often runs longer than the actual building permit itself.
Expert Verdict — Marcus Reid, Licensed Designer
"In my experience, that 11-week plan check and $425/sqft figure are Burbank state-level estimates rather than verified local numbers, so I'd get quotes from at least two Burbank-based contractors and call the Building & Safety Division directly before penciling in a budget or start date. What the data doesn't show is how much a clean, complete drawing set matters — I've seen straightforward projects sail through in that window and incomplete submittals drag on for months."
Market Context
Burbank has a median home value of $870,000. Comparable renovation projects in this market typically add 28% to resale value.
Neighborhoods in Burbank with the strongest home addition and resale value potential include Media District, Magnolia Park, Rancho Equestrian, Chandler Park, Hillside District. Very high rental demand from Warner Bros./Disney studios and many single-family and new multi-family homes make ADUs highly rentable.
Permit Process
Permit applications are reviewed by the Building & Safety Division, with a plan check timeline of approximately 11 weeks. Permit fees in Burbank range from $16,019 to $22,603 depending on project scope. Design review: Yes - in historic districts only.
Burbank falls within Seismic Design Category D, which affects structural requirements for any new addition tying into the existing structure.
Local Financing Resources
Local Home Addition Lenders in Burbank
These lenders offer HELOC, construction, and renovation loans for home addition projects in Los Angeles County. Compare terms before committing.
Intro APR as low as 4.99% with HELOC limits reported up to $500,000; membership required (CA/AZ/NV).
Visit Lender ↗Local Burbank bank HELOC page showing sample variable APRs by amount (e.g., 6.75%–7.50% in current table).
Visit Lender ↗Offers HELOC and fixed home equity loans in CA (HELOC available for CA properties); used commonly for renovations.
Visit Lender ↗Home equity product advertised with rates 'as low as 5.99% APR' and targeted for home improvements.
Visit Lender ↗Fintech that arranges ADU/renovation financing through credit union partners; cites sample variable-rate RenoFi HELOC (10-year draw, 15-year repayment).
Visit Lender ↗Build With A Plan is not affiliated with these lenders. Always compare rates and consult a mortgage professional.
Local Build Partners
Vetted Home Addition Contractors in Burbank
We draw the plans. These contractors build the addition. Independent — no referral fees paid or received.
Build With A Plan provides drawings only. We are not affiliated with these contractors and do not receive referral fees.
Drawing Package Details
What's Included in Your Burbank Home Addition Package
Transparent Pricing
Burbank Home Addition Drawing Packages
One-time fee. No retainer. No hourly billing.
- ✓Site plan
- ✓Floor plans (existing + proposed)
- ✓All 4 elevations
- ✓Electrical plan
- ✓Title 24 energy compliance
- ✓PDF + DWG delivery
- ✓10 business day turnaround
- ✓Everything in Starter
- ✓Stamped structural drawings
- ✓Foundation plan
- ✓Roof framing plan
- ✓Window & door schedules
- ✓1 round of revisions
- ✓Everything in Standard
- ✓3D rendering
- ✓Cross-section details
- ✓Material specifications
- ✓HOA submission package
- ✓2 rounds of revisions
- ✓Priority 5-day turnaround
After You Order
Your Addition Drawings in 3 Steps
Submit Your Project Details
Share your property address, existing floor plan (if available), and the addition scope. We assign your project coordinator within 4 business hours.
We Draft Your Drawings
Our team designs your complete addition drawing set — engineered for Burbank's building department requirements and CA CBC code. Delivered in 10 business days.
Submit to Your Building Dept
Download your complete package and submit to Building & Safety Division. We support plan check corrections at no extra charge.
Common Questions
Burbank Home Addition FAQs
Do I need a permit for a home addition in Burbank? +
Yes — any structural addition to your home in Burbank requires a building permit. This applies to room additions, second-story additions, sunrooms, and attached garages. You'll need permit-ready drawings before the building department will accept your application. Our packages are formatted specifically for Burbank's submittal requirements.
How much does a home addition cost in Burbank? +
Home additions in Burbank typically cost between $250.0–$350 per square foot depending on the scope, finishes, and structural complexity. A 600 sq ft addition ranges from $150,000 to $210,000. Second-story additions cost more than ground-floor extensions due to structural requirements. Our drawing packages start at $1,497 — a fraction of local architectural fees.
What drawings are required to permit a home addition in Burbank? +
Burbank's building department requires: a site plan showing the addition's footprint and setbacks, floor plans for all affected levels, all four exterior elevations, an electrical plan, and energy compliance (Title 24 in California). Structural plans stamped by a licensed engineer are required for any load-bearing elements — included in our Premium package.
How long does the permit process take for a home addition in Burbank? +
Plan check in Burbank typically takes 11 weeks for home additions. Additions with structural components may require additional review. Complete, code-compliant drawings significantly reduce correction cycles — each cycle adds 3–6 weeks. Our drawings are engineered to pass on the first submittal.
What setbacks apply to home additions in Burbank? +
Burbank enforces minimum setbacks from property lines for all additions: typically 4–5 ft side setbacks and 5 ft rear setbacks, though these vary by zoning district and lot size. Your addition must stay within the buildable envelope. Our site plan documents existing and proposed setbacks and flags any zoning variances required.
Do I need structural drawings for a home addition in Burbank? +
Yes, for most additions. Any load-bearing walls, new foundations, second-story construction, or roof structure changes require stamped structural drawings from a licensed engineer. California's CBC (California Building Code) and seismic requirements make structural plans mandatory for most addition types. Our Standard and Premium packages include stamped structural drawings.
How much do home addition drawings cost in Burbank? +
Our permit-ready home addition drawing packages for Burbank start at $1,497. Local architects and designers typically charge $3,000–$10,000+ for comparable drawing sets. Every package is engineered for CA code compliance and formatted for Burbank's building department. Turnaround is 10 business days with a 14-day money-back guarantee.
Will a home addition increase my home's value in Burbank? +
In Burbank, where median home values are approximately $870,000, a permitted home addition adds square footage that appraisers value as part of the home's gross living area. Return on investment varies by addition type — master suite additions, family room expansions, and additional bedrooms typically recoup 50–75% of project cost in appraised value in CA markets.
Can I add a second story to my home in Burbank? +
Second-story additions are permitted in most Burbank residential zones, subject to height limits and design review requirements. California generally requires ministerial permit approval, but some cities impose design compatibility or neighborhood compatibility review for second stories. Our drawings cover all levels including foundation upgrades, shear walls, and roof framing required for vertical additions.
Nearby Cities
Also Available in Burbank
Adding an ADU instead? See our ADU design service.
Next Steps
Ready to Move Forward With Your Burbank ADU?
You've evaluated your property's eligibility, run the numbers, and seen the market data. The next step is getting permit-ready architectural drawings to submit to Building & Safety Division.
Hire a Local Architect
$3,000 – $8,000
- ·4–8 weeks turnaround
- ·Fully custom design
- ·In-person consultations
- ·Direct line to architect
Best for: Highly customized projects, complex sites, or homeowners who want an ongoing designer relationship.
Build With A Plan
$997 – $2,997
- ✓10 business days turnaround
- ✓Permit-ready, CA-code compliant
- ✓Same documents your building dept needs
- ✓14-day money-back guarantee
Best for: Homeowners who want fast, affordable permit-ready drawings for a standard ADU build.
Both options produce permit-ready architectural drawings accepted by Building & Safety Division. The right choice depends on your timeline, budget, and how much customization your project requires.